*** Cisco Serial File Transfer ****
Note: This is a slow transfer you have to uibcrease teh baud rate or it will take hours.
Hold down the MODE button while you reconnect the power cable to the switch
Issue the flash_init commandIssue the dir flash: if there is a good boot image issue the boot flash command. If there is not change baud rate then open hyperterm to transfer the new image.
set BAUD 115200copy xmodem: flash:c3750e-ipbasek9-mz.122-55.SE9.binset BAUD 9600
====sh bootconfigure terminalboot system flash:c3750e-ipbasek9-mz.122-55.SE9.bin
Powered by BetterDocs
You must be logged in to post a comment.